I2R 240 Single Phase 5k/10k
The I2R DIN Rail product line is a CE listed product designed for use in global applications. It is equally able to be DIN 1 rail mounted or simply fastened to any surface via two (or more) bolt flanges on each base. The I2R DIN Rail product line is available for the protection of 120 and 240 VAC services. It is a modular system with factory configured bases for a variety of service configurations. The I2R product line can suppress transients line-to-line, line-to-neutral or common mode.
230/240VAC single phase or 400/415VAC three phase
All products feature SASD= Silicon Avalanche Suppressor Diode protection.
Applications:
| Protection for Small distribution board |
I2R240S5K, Single phase, 5kA |
| Protection for Large distribution board |
I2R240S10K,Single phase, 10kA |
Domestic/Commercial – 240VAC, 7000A DIN Rail Mount, LED OK Indicator
Best overvoltage protection performance for electronic equipment, without degradation over time or number of surges suppressed.
Din rail mounted 240/415 VAC silicon diode surge suppressor.
- Hot swap plug and play modules.
- 5ns reponse time to clamp overvoltages.
- Two LED's show power and protected status.
- Wire in for distribution board protection.
- Voltage free contacts for remote alarming.
|
- 5kA model for distribution boards to 400A when more than 10m from transformer.
- 10kA model for distribution boards to 800A when more than 10m from transformer.
- 20A fuse/breaker protection required.
- 8W standby power.
- Dimensions:86x115x91
|
|
